SRBMiner Cryptonight AMD GPU Miner V1.4.4





  • Download V1.4.4:
    Mega : https://mega.nz/#F!qVIgxAwB!kK...
    MD5  : ca3ebc0fb1008d62c94db7960b8ae417 *SRBMiner-CN-V1-4-4.zip




    Supports:

    - Cryptonight
    - Cryptonight V7
    - Cryptonight Lite
    - Cryptonight Lite V7
    - Cryptonight Heavy
    - Cryptonight Ipbc

    Supports Nicehash, Nicehash V7 & SSL/TLS encrypted connections

    For best results use Blockchain compute drivers (Get it from here) or Radeon Adrenalin 17 or newer drivers.
    ADL tested & working with Radeon Software Crimson ReLive Edition Beta for Blockchain Compute Driver Version 17.30.1029

    What can this miner offer you beside usual mining functionalities:

    DevFee:
    - Low DevFee (0.85%) -> every ~2 hours 1 minute mining for the dev
    - Non-agressive DevFee mining -> if miner can't connect to DevFee pool, no problem, switching back to user pool ASAP
    - 3 locations for DevFee pool : europe, asia, usa

    Performance:
    - Only one parameter you have to play with : intensity (0 - 300)
    - Leave intensity on 0, and miner will try to set a minimum start intensity automatically
    - To get even better results, there is an option to use double threads

    Extra:
    -
    Watchdog that monitors your GPU threads, if they stop working, miner
    exists, and restart script takes over and well.. restarts mining Smiley
    - Set the target temperature you want, and miner will set fan speed according to that

    Tips:
    - If you leave intensity on 0 it will play safe, so in many cases you can increase that value to get better results
    - For better results set double_threads to true, and leave intensity on 0
    - If you get an error that says it can't create scratchpad buffer, you have to lower intensity
    - Largest intensity setting won't always give you the best hashrate. Experiment and find the best setting for your GPU.

    How to set it up ?

    The config file :

    "cryptonight_type" : "NORMAL, NORMALV7, LITE, LITEV7, HEAVY OR IPBC"
    "intensity" : A NUMBER BETWEEN 0-300,
    "double_threads" : TRUE OR FALSE,
    "target_temperature" : A NUMBER BETWEEN 0-99

    Optional parameters :

    "giveup_limit" : HOW MANY TIMES TO TRY CONNECTING TO A POOL BEFORE SWITCHING TO NEXT POOL
    "timeout" : WHEN IS A CONNECTION TO POOL TREATED AS TIMED OUT , IN SECONDS
    "retry_time" : HOW MUCH TO WAIT TILL RECONNECTING WHEN DISCONNECTED FROM POOL, IN SECONDS
    "reboot_script"
    : FILENAME, TURN OFF BUILT IN WATCHDOG AND INSTEAD RUN A USER DEFINED
    .BAT FILE ON GPU FAILURE (included windows restart .bat)

    Some examples for "cryptonight_type"

    normal
    electroneum, graft

    normalv7
    monero, stellite, graft (from block 65110)

    lite
    aeon

    litev7
    turtlecoin

    heavy
    sumokoin, haven

    ipbc
    ipbc

    #SET GPU'S MANUALLY
    #This example uses GPU devices with ID 0,1,3,4 and every GPU has it's own setting
    "gpu_conf" :
    [
       { "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 1},
       { "id" : 1, "intensity" : 20, "worksize" : 16, "threads" : 2},
       { "id" : 3, "intensity" : 30, "worksize" : 16, "threads" : 2},
       { "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 1},
    ]

    So if you for ex. have 6 GPU's but want only to use 3, first run SRBPolaris-CN.exe --listdevices to list devices and their id's, that you can put in config file under gpu_conf part.

    DON'T
    comment out or remove intensity and double_threads setting at the top
    of the config file, just leave it as-is, because when you use a per card
    setting, those settings will be ignored.

    The pools file:

    {
    "pools" :
    [
       {"pool_use_tls" : false, "pool" : "pool1address", "wallet" : "pool2wallet", "password" : "x", "location" : "europe"},
       {"pool_use_tls" : false, "pool" : "pool2address", "wallet" : "pool2wallet", "password" : "x", "location" : "europe"},
       {"pool_use_tls" : false, "pool" : "pool3address", "wallet" : "pool3wallet", "password" : "x", "location" : "europe"},
    ]
    }

    After setting up the config.txt file, just run start.bat
    If you want to create a separate config and pools for a different coin, use --config and --pools parameter.

    Options:

    - Press 's' when miner is running to see some basic stats
    - Press 'h' when miner is running to see hashing speed

    Parameters (go in .bat):

    --config filename (use config file other than config.txt)
    --pools filename (use pools file other than pools.txt)
    --logfile filename (enable logging to file)
    --listdevices (list available devices)
    --adldisable (disable ADL)
    --disablegpuwatchdog (disable gpu crash detection)

    Info:
    You have to change the wallet address in sample config.txt file, if you leave it, you will mine some XMR to me.

    For better results use a bios that is prepared for mining. Get one from https://mining-bios.eu



Looks like your connection to Cryptocentral was lost, please wait while we try to reconnect.